Type 302 Stainless Steel Wire Brushes Material Safety Data
Sheet (MSDS)
Section I
Manufacturer's Name: Weiler Corporation
Address: One Weiler Drive, Cresco, PA 18326
Emergency Telephone Number: (570) 595-7495
Telephone Number for Information: (570) 595-7495
Date prepared: January 6, 2012
Name of preparer: Frank J. Hettes
Section II - Hazardous Ingredients / Identity Information
Hazardous Components,
(Specific Chemical Identity, Common Name(s)
CAS#
OSHA PEL
ACGIH TLV
NTP
Listed
IARC
Listed
WT %
Iron
7439-89-6
None
None
No
No
48-89
Chromium
7440-47-3
1.00
0.50
Yes
Yes
10-27
Nickel
7440-02-0
1.00
1.00
No
Yes
0-35
Manganese
7439-96-5
C5 (6)
C5
No
No
0-15
Tungsten
7440-33-7
None
5.00
No
No
0-4
Molybdenum
7439-98-7
15.0
10.00
No
No
0-4
Aluminum
7429-90-5
None
10.00
No
No
0-2
Copper
7440-50-8
1.00
1.00
No
No
0-4
Silicon
7440-21-3
None
10.00
No
No
0-5
Cobalt
7440-48-7
0.10
0.05
No
No
0-5
Section III - Physical / Chemical Characteristics Boiling Point: *N/A
Vapor Pressure (mm Hg.): *N/A
Vapor Density (AIR=1): *N/A
Solubility in Water: *N/A
Specific Gravity (H2O=1): 7
Melting Point: *N/A
Evaporation Rate (Butyl Acetate=1): *N/A
Appearance and Odor: Bright silver metal; odorless
Section IV - Fire and Explosion Hazard Data Flash Point (method used): *N/A
Flammable Limits: *N/A LEL: *N/A UEL: *N/A
Extinguishing Media: *N/A
Special Fire Fighting Procedures: *N/A
Unusual Fire and Explosion Hazards: None known
Section V - Reactivity Data Stability: Stable
Incompatibility (Materials to Avoid): None
Hazardous Decomposition or Byproducts: Metal fumes - iron oxide, manganese, nickel,
chromium, molybdenum, copper, vanadium, pentoxide.
Hazardous Polymerization: Not known
Section VI - Health Hazard Data
Routes of Entry
Solution
Inhalation
Wear approved respirator.
Eyes
Wash eyes with water, seek medical attention.
Ingestion
Seek medical attention.
Clothing
Wash clothing.
Skin
Wear eye protection and protective clothing.
Carcinogenicity: Not known
Signs and Symptoms of Exposure: Not known
Medical Conditions Generally Aggravated by Exposure: Not known
Emergency and First Aid Proceedures: Wash skin with soap and water; seek medical attention.
Section VII - Precautions For Safe Handling And Use Steps to be taken in case material is released or spilled: *N/A
Waste disposal method: Dispose of in accordance with EPA or local regulations.
Precautions to be taken in handling and storage: *N/A
Other Precautions: Welding and cutting - use adequate ventilation and approved respirator.
Section VIII - Control Measures Respiratory protection (specify type): Use approved NIOSH respirator.
Ventilation:
Local Exhaust: Use when welding or cutting.
Special: Depending on use, consult local, state and federal codes for appropriate selection.
Mechanical (General):
Protective gloves: Wear gloves.
Eye protection: Wear eye protection.
Other protective clothing or equipment: Wear protective clothing.
Work/Hygienic Practices: Keep work area clean.
