MSDS Sheet

MSDS

Tampico Brushes

Section I
Manufacturer's name: Weiler Corporation
Address: One Weiler Drive, Cresco, PA 18326
Emergency telephone number: (570) 595-7495
Telephone number for information: (570) 595-7495
Date prepared: December 19, 2006

Section II - Hazardous Ingredients/Identity Information

Hazardous Components (Specific Chemical Identity, Common Name(s):
Metal Components: Are "articles" and do not result in exposure to any hazardous chemicals
under normal conditions of use.
Fill Material: Not applicable - is a solid filament and, therefore, presents no likelihood of exposure.
CAS#: N/A*
OSHA PEL: N/A*
ACGIH TLV: N/A*

Section III - Physical/Chemical Characteristics

Boiling Point	N/A*
Vapor Pressure (mm Hg.)	N/A*
Vapor Density (AIR = 1)	N/A*
Solubility In Water	N/A*
Appearance And Odor	White, gray, black, odorless
Specific Gravity (H20 = 1)	1.05-1.50
Melting Point	N/A*
Evaporation Rate (Butyl Acetate=1)	N/A*

Section IV - Fire And Explosion Hazard Data

Flash Point (Method Used):	N/A* - Solid material Flammable Limits: LEL: N/A* UEL: N/A*
Extinguishing Media	CO, Foam, Dry Chemical or Water
Special Firefighting Procedures	Full emergency equipment with a self-contained breathing apparatus and full protective clothing should be worn by firefighters
Unusual Fire & Explosion Hazards	During a fire, irritating vapors and toxic gasses will be generated.

Section V - Reactivity Data

Stability: Stable
Conditions To Avoid: Do not inhale smoke or fumes
Incompatibility (Materials To Avoid): Strong acids, bases and oxidizing agents
Hazardous Decomposition Or Byproducts: Burning solid filaments produces toxic decomposition products.
Major: CO, NxO, CO2
Hazardous Polymerization: Will not occur
Conditions To Avoid: N/A*

Section VI - Health Hazard Data

Route(s) of Entry : Inhalation? Yes    Skin? No     Ingestion? Seek medical help
Health Hazards: Acute: None Known    Chronic: None Known
Carcinogenicity: Not Known     NTP?   IARC Monographs?    OSHA Regulated?
Signs and Symptoms of Exposure: N/A*
Medical Conditions Generally Aggravated by Exposure:
Emergency and First Aid Procedures: Remove to fresh air, administer oxygen if exposed to fumes.
Get medical help.

Section VII - Precautions For Safe Handling And Use

Steps to be taken in case material is released or spilled: Collect as normal solid waste
Waste Disposal Method: Incinerate or bury in landfill
Precautions to be taken in handling and storing: None
Other Precautions: None

Section VIII - Control Measures

Respiratory protection (Specify type): Do not breathe fumes produced by welding or burning. Use NIOSH approved dust/fume respirator to keep dust at a minimum level.
Local Exhaust: Yes
Protective Gloves: Yes
Eye Protection: Safety Glasses
Other protective clothing or equipment: Safety glasses and protective clothing must be worn when operating power brushes
Work/Hygienic Practices: N/A*

MSDS Tampico Brushes

MSDS

Tampico Brushes